Webster

The Constitution was made to guard the people against the dangers of good intentions." --American Statesman Daniel Webster (1782-1852)


Showing posts with label Prewar. Show all posts
Showing posts with label Prewar. Show all posts

Wednesday, August 2, 2023

Marines and the M1 Garand.

 

I saw this on "American Rifleman and thought it was a good story of the M1 Garand, Before I *lost* my Garand in that dastardly Kayak Accident *Sniff*Sniff* it was one of my favorite rifles to shoot.



, Serial No. 3706. The rifle has been upgraded and overhauled multiple times during its service life. All that remains that was present during the test is the receiver.
Photos courtesy of authors.


Due to its impressive combat performance during the Second World War, Gen. George S. Patton dubbed the M1 Garand "the greatest battle implement ever devised." That said, the Garand did suffer some setbacks over the course of its design, trial and ultimate adoption by the U.S. military. One of the most commonly held misconceptions of the entire process is the claim that the United States Marine Corps was entirely uninterested in a semi-automatic service rifle but finally came to adopt and love the M1 Garand and, with that, replace the time-honored M1903 Springfield.

One frequently repeated notion is that the Marines fought the adoption of the Garand because of a belief that it would waste ammunition and degrade their foundational “every Marine is a rifleman” ethos. The story goes: The "Old Guard," who were more conservative and resisting change, delayed the adoption as long as they could. It wasn't until after the Guadalcanal campaign in 1942, when Marines fought the Japanese alongside U.S. Army troops carrying the M1 Garand service rifle, that they saw the errors of their ways and left their M1903 bolt-action rifles in the past to adopt the new semi-automatic rifle.

m1 garand shown with gear jacket helmet bandolier bayonet gun rifle angled across clothing magazine en bloc clip ammunition

While it’s a plausible theory, especially given the historical conservative nature of military decisions makers, in truth, it is mostly apocryphal and certainly does not tell the story contained in primary source documentation at the National Archives. These documents show a more nuanced relationship between the Marines and the M1 Garand. The chief of ordnance saw the value of an infantryman wielding a semi-automatic rifle against an enemy that would likely field a bolt-action rifle. One of the earliest accounts of this is suggested at Springfield Armory in 1902. However, at that time, they could never get it to work correctly. Even during the First World War, the U.S. Army continually looked for the technological edge on the battlefield in the hands of the rifleman, even investing heavily into the ultimately unnecessary 1903 Mark I and M1918 Pistol (Pedersen Device). 

Although that project will go down in U.S. military history as a colossal failure, it didn't stop the U.S. military. In the early 1920s, two prominent designers were the front-runners in designing the next U.S. infantry rifle on a semi-automatic platform. Those were John D. Pedersen and John C. Garand. Ultimately, John Garand would win the competition, but his story with the Marine Corps is complex.

Initial Interest and Orders
Through the Department of the Navy, the Marines’ interest in the M1 Garand predates the jungles of Guadalcanal by a decade. In 1932, Secretary of the Navy Charles Francis Adams III suggested field trials of John Garand’s experimental semi-automatic rifle (T3E2) chambered in .276 Pedersen. He mentioned that the final test of any tool is its performance in combat. Owing to that fact, he suggested that Nicaraguan National Guard Detachment, which is composed of personnel of the Marine Corps and is frequently engaged in combat in that area, would perform a suitable combat trial. He requested 10 of these rifles with 30,000 rounds of ammunition to conduct a test. General Douglas MacArthur issued a reply in March 1932 that such a test could not be authorized. It should be noted that this predates the adoption of the Garand in .30-06 Sprg., and this suggestion was made while the Garand was still chambered for its original .276 cartridge.

General Douglas MacArthur denies the Marine Corps field test of the Garand semi-automatic rifle (T3E2) in .276-cal. Photo courtesy of Archival Research Group.General Douglas MacArthur denies the Marine Corps field test of the Garand semi-automatic rifle (T3E2) in .276-cal. Photo courtesy of Archival Research Group.

Although the request was denied, the Marines' interest in the Garand persisted. On Oct. 3, 1935, Victor H. Czegka wrote to Maj. Julian Hatcher of the Ordnance Department that he intended to visit Springfield Armory with Melvin Johnson, a reserve officer of the U.S.M.C. at the time. Specifically, they mentioned they would greatly appreciate the privilege of viewing the new "Garand gun." It should be pointed out to the readers that Johnson and Czegka were both active in the firearms industry at that time, with Johnson later developing the Johnson Automatic Rifle (itself being eventually evaluated and fielded by the Marine Corps), and Czegka winning the prestigious Wimbledon Cup, a celebrated long-range shooting event. They were well-known personalities, yet on Oct. 10, Lieut. Col. S. H. MacGregor denied their request with a simple “permission can not [sic] be granted to you to examine this weapon.”

The Marine Corps' persistent interest would continue into early 1936 when the commandant of the Marine Corps placed an order with the chief of ordnance for:

"400 rifles, U.S., semiautomatic, caliber .30, M1, complete with spare parts, equipment common to the caliber .30 M1903 rifle, and except that only four clip-loading machines should be supplied." 

This order amounted to $44,400 plus $100 shipping and handling. This price was later amended by the Paymaster General of the Navy Department to $54,100.00 (with the $100 shipping charge). To add context, this would reflect a price tag of $1,180,714.99 ($2,182.47 shipping and handling) adjusted for inflation to the year 2023.

The first 100 M1 Garand rifles were received at the Philadelphia Depot on March 12, 1938, and retained, awaiting further instructions by the quartermaster of that depot. The following month, on April 8, 1938, Lt. Col. S. P. Spalding wrote the quartermaster of the depot, noting his verbal request that all 400 rifles be provided at approximately the same time. Because of this, and because the Army urgently needed the rifles, it was agreed upon that the U.S.M.C. would return those first 100 rifles to the Army, with 400 rifles earmarked for the Marines after June 30, 1938. On April 22, a memorandum was drafted indicating that the 100 M1 Garand rifles were shipped to the ordnance officer at Fort Benning, Ga., by the Merchant's Mining Company on April 11th. The Marines' opportunity to test a semi-automatic rifle would have to wait.

Victor H. Czegka with Melvin Maynard Johnson eagerly requesting permission to see John Garand’s new rifle semi-automatic rifle. Photo courtesy of Archival Research GroupVictor H. Czegka with Melvin Maynard Johnson eagerly requesting permission to see John Garand’s new rifle semi-automatic rifle. Photo courtesy of Archival Research Group.

The Ordnance Department finally sent some much-awaited news that they would ship 398 rifles to the U.S.M.C. Depot of Supplies on Sept. 15, 1938, and that two rifles had been sent to Marine Corps schools in Quantico, Va., earlier that month. Army Ordnance also wanted to make the U.S.M.C. aware of the long list of difficulties accompanying the rifles and their testing. One of the primary issues was that the standard cleaning rod used was too long. Because the rifle had to be cleaned from the muzzle instead of the breech, it caused damage to the rear wall of the receiver and the head of the bolt, something that was being addressed with the production of a shorter cleaning rod.

Finally, on Nov. 19, 1938, the director of the Division of Operations and Training wrote to the commandant of the U.S.M.C. that a marksmanship and field test should be conducted to determine whether the new rifle, U.S., caliber .30, M1, should replace the M1903 Springfield rifle. He further noted that the current strength of rifle units in an infantry battalion of the Fleet Marine Force (FMF) is approximately 255 enlisted men (armed with the rifle). Owing to the fact the number of rifles ordered (400) provided a sufficient number to equip the rifle units of one battalion, an additional platoon, and furnish several Marine Corps Schools and Basic Schools that, a distribution of the following should be made:

6th Marines

300

5th Marines

35

Basic School

35

Marine Corps Schools

10

Depot of Supplies (for spares)

20

Total

400

On Jan. 3, 1939, the commandant of the U.S.M.C. notified the commandant of the Marine Corps Schools at Quantico that they would receive 10 rifles from the Depot of Supplies, which includes two that had already been accepted. He further notified him that the school would be receiving the following:

  • Essential parts and accessories.
  • Basic Field Manuals for the U.S. Rifle, Caliber .30 M1
  • Charts for Instruction
  • 1,056 cartridges, ball caliber .30 M1, loaded on clips of (8) cartridges each (1 box containing 132 loaded clips).

The Basic School at Philadelphia would receive the same components above, except getting 35 rifles instead of 10 and 13,728 cartridges instead of 1,056. It was requested that reports be made and returned to the U.S.M.C. Commandant by June 30, 1940, and the reports should contain the following:

  • Total ammunition fired.
  • Rounds were fired from each rifle.
  • Classes of stoppages, causes, and corrective measures for each rifle.
  • Malfunctions or broken parts for each rifle.
  • Injuries caused by rifles, if any, to personnel.
  • A tabulation of firing results for experts, sharpshoots, marksmen, and unqualified personnel.
  • Results of musketry and combat firing were tabulated and compared with similar firings done with the M1903 rifle and Browning Automatic Rifle.
  • Accuracy of the M1 rifle as compared with M1903 and Browning Automatic Rifle
  • Suitability or use in bayonet use.
  • Simplicity of mechanical construction.
  • Each and Simplicity of assembling and disassembling.
  • The suitability of the sights.
  • Fatigue from firing the M1 rifle as compared with firing the M1903 and Browning Automatic Rifle.
  • Recommendations, if any, for correcting mechanical deficiencies of the rifle.
  • Recommendations as to spare parts that should be furnished with each rifle.
  • Does the M1 rifle perform satisfactorily in the capacity in which intended, namely as a replacement for the M1903 bolt action rifle?
  • Any other information of pertinent nature is not covered above.

Lieutenant-Colonel MacGregor of the Ordnance Department very concisely gave Czegka and Johnson a curt “no” in their request. Photo courtesy of Archival Research Group.Lieutenant-Colonel MacGregor of the Ordnance Department very concisely gave Czegka and Johnson a curt “no” in their request. Photo courtesy of Archival Research Group.

By February 1939, reports came in from the 6th Marines, 2nd Marine Brigade and Fleet Marine Force in San Diego that many new rifles received had rusted (pitted) barrels when they were received. Reports of any defects were to be reported to the U.S.M.C. commandant at the earliest practicable date. On Feb. 17, 1939, the commanding officer of 1st Btn., 6th Marines, notified the U.S.M.C. commandant of the news. Specifically, he reported that 300 rifles had been received in new arms chests and were packed with heavy oil but not cosmoline. He described the following:

"In general, the rifles were found to be dirty and rusty. Large carbon deposits and powder fowling [sic] were found in the bores and also in the gas cylinders, and rust was noted on some working parts as well. The bores of the rifles were found to be badly pitted to the extent of about 1 in 12 rifles, slightly pitted in about 1 out of 2 rifles, and very slightly pitted in 1 out of about 6. Precisely of the 263 rifles issued and covered by the enclosures, the following conditions were found:

                 Badly pitted bore…………………….22

                 Slightly pitted bore…………………...152

                 Very slightly pitted bore………………45."

Later that month, the Marine Corps Schools at Quantico reported that the 10 rifles it received had no defects upon inspection. The Marine Basic School in Philadelphia noted that its 35 rifles had received prior inspection for defects; each rifle was disassembled and thoroughly cleaned. The barrels and chambers of all rifles were found to be free from defects. However, upon cleaning the grease from the bores, it was noted that the cleaning patches from several rifles came out very black, indicating these rifles had not been cleaned as prescribed and were lucky to escape damage.

The commanding officer of the 6th Marines, 2nd Marine Brigade FMF followed up with a previous report denoting that 13 of the 14 rifles sent to Philadelphia as being pitted and were found mechanically defective from "cuts, flaws and tool marks." Eight of them were so defective as to be unserviceable. He further noted that a large percentage of the new rifles were not of the type of workmanship that his officers were accustomed to handling.

This parallels a previous report from the commandant, who had noted that Springfield Armory had experienced some issues in the quality of the steel stock purchased for the manufacture of the M1 rifle. The flaws encountered by the Marines in the finished product support this. He further noted that Springfield Armory informed him that it will take some time to adjust the new machines to the type of steel they are using. This accounts for some barrels with tool marks and occasional cuts in the bore. The M1 Garand was going through some significant growing pains before turning into the finished product that served admirably throughout World War II.

The modification (arrow) on the inside of the receiver showing the modification to fix the “7th round stoppage.” The discoloration on the “rib” showing where extra metal was welded to fix that problemThe modification (arrow) on the inside of the receiver showing the modification to fix the “7th round stoppage.” The discoloration on the “rib” showing where extra metal was welded to fix that problem

The situation would get even more complicated when the commanding officer of Co. B, 1st Batn., 6th Marines, 2nd Marine Brigade, stated that the rifles were carefully inspected upon receipt. He noted:

"All rifles were received with bores in a very dirty condition. They have the appearance of having been fired, then greased and packed without previously completing a course of cleaning suitable for prolonged storing. The bores were coated with a medium but sufficiently heavy coat of grease. The mechanical parts were dry, and in some cases, and on a few rifles, rust had begun to appear." He further noted that, in nearly all cases, the gas cylinders were found to be pitted after cleaning, and the gas cylinder plug was covered with a heavy coat of carbon. 

It's clear that the Marine Corps’ desire to test a semi-automatic rifle was off to a rocky start, and it wasn't until May 1940 that a full report could be written on how the rifles performed. It should be emphasized that the rifles were first ordered in 1936, and the test wasn't concluded with a final report until the middle of 1940.

The report indicated that they fired a total of 244,845 rounds in testing during the 1939 targeting year. The report also recorded 131 stoppages, malfunctions or broken parts (this includes disregarding gas cylinder plugs out of line, cracked stocks, etc.). It also reported that 22.1 percent of the present rifles had some stoppage or malfunction that would have put the rifles permanently out of action in the field. Other notable comments were as follows:

  • In every instance except one, the M-1 proved superior to the M-1903 in musketry and combat exercises when reduced to the everyday basis of the number of hits scored per round per minute.
  • All reports indicated that the M-1 rifle was more accurate than the Browning Automatic Rifle but less accurate than the M-1903.
  • M-1 was suitable for bayonet combat.
  • The M-1 is easier to assemble and disassemble than the Browning Automatic Rifle.
  • There is considerably less fatigue from firing the M-1 rifle than is experienced with the M-1903 or Browning Automatic Rifle.
  • The effective rate of fire is 16-20 shots per minute.
  • Clips must be handled carefully to prevent rust, denting, or other damage which will cause malfunction.
  • It is believed that salvaged clips can be used for a limited time and that most of the ammunition for the M-1 rifle should be purchased already loaded on clips to obtain the best results. Reloading the clips is a slow process.
  • The rifle must be fieldstripped for cleaning, which improves the protection of several working parts from loss and dirt during the process. 
  • The bolt and receiver assembly becomes loose due to wear on the locking lugs.

The M1 debut with the Marine Corps proved rocky but favorable. But the U.S.M.C. understood the M1 was in its infancy and would have improvements made on later models. Some of those recommended improvements included:

  • Change the front sight blade to .05 or .06 inch width.
  • Reduce the size of the rear sight aperture slightly.
  • Improve the design of the rear sight
  • Provide a better quality of metal and the fit of the trigger pin.
  • Change the design and material in the front hand guards to prevent cracking.
  • Modify the method of holding the receiver group in stock to eliminate play which develops due to wear on the locking lugs
  • Improve the type of chamber cleaning tool.

And lastly, the most critical question: "Does the M1 rifle perform satisfactorily in the capacity intended, namely a replacement for the M1903 bolt-action rifle?” The report answers this question in this way:

"There is serious doubt as to the suitability of the M1 rifle in its present state of development as a replacement for the M1903 rifle because of: the number of malfunctions experienced, even under satisfactory conditions under which the majority of those tests have been confirmed; the fact that the rifle requires extreme care and lubrication to ensure that it will function properly; and the defects reported by the 1st Marine Brigade FMF, as a result of the limited field test conducted at Culebra. This is especially true when one considers the type of service the Marine Corps as a whole in small wars and landing operations."

Between the wood is a March 1966 barrel stamp, which was likely due to the Department of Defense overhaul of M1 Garands beginning in 1963.Between the wood is a March 1966 barrel stamp, which was likely due to the Department of Defense overhaul of M1 Garands beginning in 1963.

The Marines saw value in the new M1 rifle, but it also noted that it was going through some "growing pains." It also pointed out that the Ordnance Department recently changed the design of the barrel, gas cylinder and gas plug assemblies, and these improvements will go into mass production at Springfield Armory in mid-May 1940. This is when the design evolved from the "gas-trap" Garand to the "gas-port" Garand. These improvements were significant, as they would correct several problems encountered with the earlier designs.

In November 1940, the U.S.M.C. conducted yet another test. This was a competitive test between the M1903 Springfield Rifle, M1 Garand, Johnson Automatic Rifle and a Winchester semi-automatic Rifle. This test concluded that the M1 was superior to the M1903 under favorable conditions and that the M1 was considered suitable for arming components of the Marine Corps, which generally would not be called upon to operate under conditions approaching those of more severe tests. The most interesting comment was, "Judging by the experience with other rifles in the past, and the improvements which have been made and contemplated in the U.S. Rifle Caliber .30 M1, it may be expected that the operation of this rifle will be improved still further." While the Marine Corps certainly saw the merit in the M1, it just concluded that, in the gun’s present state, it wouldn't be suitable for front-line combat. The Marine Corps formally adopted the rifle on Feb. 18, 1941, a mere five years after the first purchase order.

Relics From The Tests
One rifle actually used in the early U.S.M.C. trials has been secured for photographs. Its serial number is 3706, and it first appeared on the inspection report from the commanding officer of Co. B," 1st Btn., 6th Marines, 2nd Marine Brigade, on Feb. 10, 1939. It was noted that, upon inspection, the barrel had pits on lands at a point 5" from the muzzle, and the gas cylinder was slightly pitted. It appears later in the report from May 1940 where it is recorded it had 260 rounds fired through it during the tests.  

Technical Specifications:
Serial Number: 3706
Receiver Drawing Number: D 28291
Barrel Date: 3-66
Stock: Letterkenny Replacement
Trigger Housing: D28290-18-SA
Bolt: D28287-12SA

It's unclear how long this rifle stayed in Marine Corps custody, because it appears to have returned to the Army at some point in its service life. In April 1941, the Ordnance Department acknowledges an inquiry from the Marine Corps quartermaster concerning the conversion of (gas trap to gas port) 400 rifles on hand at the Philadelphia Navy yard. The Ordnance Department suggests shipping those rifles to Springfield Armory to be converted. It is unclear if these rifles were in fact shipped to Springfield Armory, if they were exchanged for new rifles or if they were converted and shipped back to the quartermaster.

Receiver leg electro-penciling “LEAD” indicating overhaul at Letterkenny Army Depot in September 1966Receiver leg electro-penciling “LEAD” indicating overhaul at Letterkenny Army Depot in September 1966.

The toe of the receiver is marked "LEAD 9-66," which stands for Letterkenny Army Depot with the month and year of its overhaul. Beginning in early 1963, the Department of Defense began a plan of overhauling M1 Garands starting at Springfield Armory. Still, it would carry over into other arsenals around the country. The stock also possesses the "red triangle,” which is the mark of a Letterkenny replacement stock.

Red triangle marked stock which is a Letterkenny replacement stock.Red triangle marked stock which is a Letterkenny replacement stock.

It has been long believed that the U.S.M.C. fought tooth and nail against adopting the M1 Garand, that the corps wanted to maintain its treasured M1903 Springfield rifle until the Guadalcanal campaign changed their mind. However, looking through primary source documentation, it is clear that this was actually not the case. It's now known that the Marines took a very early interest in a semi-automatic rifle, dating all the way back to 1932. They would make their first orders in 1936 but would not be able to complete testing and file reports until 1939, due to a series of obstacles. The Marines would then conduct a second test against other possible semi-automatic platforms in late 1940.

The Marines also understood that there was significant value in the M1 Garand specifically. Still, they also understood that, as it stood in its early stages, it needed substantial improvements to reach the level of combat reliability they required. Accordingly, they took a more pragmatic approach to the problem: adopt it as an auxiliary firearm that would be issued to the troops away from the front lines. As the design improvements were adopted, the rifle became more reliable and expanded outwards. Once the supply was sufficient, the front-line combat troops would switch from the M1903 to the M1 Garand. Evidence of this was documented in February 1943 when the U.S.M..C stated it was receiving the M1 in sufficient supply and would transfer excess M1903s to the U.S. Navy. The rest is history.

Sunday, August 16, 2020

How American Airlines Prompted the Construction of an Airplane Icon

I have Blogged about the DC-3 before and this was prompted also by a memory, I was watching a movie on Netflix last weekend, called "A Bridge Too Far" and I had blogged about the movie when I did a post about the "Bailey Bridge" as I recall they had used every airworthy C-47 in the world to film the movie and you could see in the movie the hastily painted over British National insignia when the Americans were taking off.   My employer still has one of its DC-3's in a company Museum near the Airport.

American Airlines Douglas DC-3 Getty
.
Before the aircraft’s introduction, carriers were struggling to perform successfully with a long-distance passenger jet. The DC-3 revolutionized commercial services as it helped airlines to start earning regular profits on long-haul operations. If it wasn’t for the determination of Cyrus Rowlett “C. R.” Smith, the iconic president of American Airlines, the game-changing introduction may not have happened.
The US commercial aviation pioneer wanted two new planes. He sought a lower version of the DC-2, which would carry 21 passengers during the day, and he also wanted an aircraft with railroad-type sleeping berths, which would transport 14 travelers overnight.
The Douglas DC-2 was already in production in 1934, and it was a 14-seat, twin-engined plane competing against Boeing 247. According to the Archbridge Institute, Smith, alongside his top engineer, Bill Littlewood, called Donald Douglas himself to request an improved type.
However, the aircraft manufacturing giant said that his company couldn’t even keep up with orders for the DC-2. Therefore, he couldn’t justify the development costs of a whole new plane.
LOT DC-2 LOC
 Douglas DC-2
Nonetheless, Smith showed his persistence and promised Douglas that he would order 20 units of the new aircraft if they were built. After hours of negotiations, Douglas finally gave in.
To finance the deal, Smith flew to Washington to meet with Jesse Jones, the head of the government’s Great Depression-era Reconstruction Finance Corporation. He returned with a $4.5 million ($83 million today) loan secured.
Boeing highlights that the first DC-3 built was the Douglas Sleeper Transport, which passengers affectionately called the Skysleeper. It had 14 luxury seats in four in four main compartments, and they could be folded in pairs to form seven berths. Meanwhile, seven more berths folded down from the cabin ceiling. Altogether, the aircraft could fly 14 overnight passengers or 28 customers for shorter daytime flights.
The first of these planes arrived at American Airlines in June 1936. Two months later, the first standard 21-passenger DC-3 joined the company.
American Airlines DC-3
On June 25th, 1936, American launched its first regularly scheduled DC-3 flight, which was a service from Chicago Midway to Newark. The journey took three hours and fifty minutes to complete, and Smith was one of the 13 passengers aboard.
In September of that year, American started a 15 hour and 50-minute overnight transcontinental sleeper service between California’s Glendale and Newark. This trip included stops for refueling in Tucson, Dallas, and Memphis
The deployment of the DC-3 was a grand affair in airline history. American toured the plane around the US. While in Detroit, a crowd of 110,000 people gathered to see the spectacle.
The plane enabled American to operate a route that could earn a profit solely on passenger activity. At the time, operators had to rely on mail services to record gains. This progress saw American eventually hold 94 units of the type.
In the years leading up to World War II, two-thirds of American’s revenue was from passengers. Furthermore, the carrier was boasting profits of $200,000 ($3.6 million today) a year. As a result, Smith sent a check of $25 ($460 today) to two thousand of his employees that had been with the company at least one year. Moreover, newcomers received $15 ($275 today).
The DC-3’s buzz had soon spread throughout the aviation industry. Other US carriers, such as United Airlines, TWA, Eastern Air Lines, and Delta Air Lines, ordered more than 400 units of the aircraft. The increase in airline efficiency saw planes swiftly replace several train routes across the country.
United was notably proud of its new DC-3 “Mainliners”. It flew them from New York to San Francisco in less than 16 hours and made only three stops on its journey.
DC-3A United Air Lines
Two 1,200-horsepower Wright Cyclone radial engines powered the DC-3.
Additionally, the plane also caught on across the continents. For instance, in 1936, KLM Royal Dutch Airlines received its first unit. It used the aircraft to replace the DC-2 service from Amsterdam to Sydney via Batavia (now Jakarta). This operation was the world’s longest scheduled route during this period.
Altogether, between 1935 and 1946, over 10 thousand DC-3s were built. These planes were put to use by both commercial and military operators across the globe. In fact, by 1939, the DC-2 and DC-3 served 90% of all US airline customers.
Most of the military units of the DC-3 were C-47 Skytrain, which served well in WWII. Moreover, the plane also worked as a C-53 Skytrooper. The models proved to be durable, versatile, and reliable in their missions.
The DC-3 also saw deployment in other critical missions over the rest of the 20th century, such as the Vietnam War. The C-47 Skytrain even remained in service with the US military until 2008.
Douglas C-47 Skytrain
The type was a military workhorse for much of the 20th century.
The aircraft, in all its forms, would go on to be adored by several passenger airlines over the decades. Over 80 years after its debut, the type is still being spotted in the air. Just this summer, on the 76th anniversary of D-Day, tribute was paid to frontline health workers with a DC-3 towering the skies above the Finger Lakes region of New York.
Nonetheless, if it wasn’t for American Airlines’ persistence and drive, the plane’s production may have been a very different outcome. An aircraft with the name of DC-3 may have eventually been produced. However, it would have come at a later time, with different requirements and a different outcome.

Wednesday, April 22, 2020

The Boeing Monomail


This one of my Aviation related post, Flying Airmail was a lucrative business for many new airplane owners, it was a guaranteed income stream.  Boeing recognizing the lucrative possibilities designed a plane for that market segment. 




Boeing’s productions pushed the United States aviation industry forward during the first half of the 20th Century. Its seaplanes such as the B & W, Model C, and B-1 all sparked life into the growing market. Its biplanes such as the Model 40 also took flying prospects to the next level. However, the launch of the Monomail in 1930 truly helped the industry realize its potential due to the aircraft’s revolutionary features.
Boeing monomail
The Monomail marked the beginning of a new era in manufacturing at Boeing. Photo: Boeing
This monoplane helped the market shift away from the traditional biplanes of the time with its sleeker design. According to Boeing, the plane had a wingspan of over 59 feet and a length of just under 42 feet. The wing was set lower, and its smooth build was made of entirely metal and had no struts. The early form of the standard modern plane can be seen in the structure of this model.
Other vital advancements of the Monomail include its retractable landing gear and the streamlined fuselage. Moreover, its engine was covered by an antidrag cowling, adding to the aerodynamic design of the plane.
The first edition of the Monomail was the Model 200. Much like several pioneering aircraft of this era, it was a mail plane. It saw success on a route between Chicago and San Francisco from July 1931.
The unit weighed 8,000 lbs and could accommodate approximately 1,500 pounds of goods. It could reach a range of 500 miles with a top speed of 158 mph and a cruising speed of 135 mph. Additionally, it could hit a ceiling of 14,700 feet with its 575-horsepower Pratt & Whitney Hornet B engine.
Unfortunately, pilot Alva Lucas crashed a monomail while delivering mail from Montana to Wyoming in October 1935. According to Colorado Wreck Chasers, the aircraft descended too soon and impacted terrain 13 miles south of Glendo.
Boeing Monomail Hangar
               The plane was slender compared to its predecessors.
Boeing also designed another variant for passenger use in the form of the Model 221. This edition’s fuselage was stretched by eight inches and gave up some shipping capacity to carry six passengers. Additionally, the plane’s pilot handled the front in an open cockpit, taking off for the first time on August 18th, 1930.
However, it was the introduction of the transcontinental passenger service aircraft, Model 221A that left an even bigger impact. This model revised the earlier units with slight fuselage extensions to enable a cabin that can hold eight passengers inside. This type saw commercial success as United Airlines (then United Air Lines) took it on for its Cheyenne to Chicago operations.
Boeing 221 Monomail
                                              A Boeing 221 Monomail during flight.
Boeing admits that one of the significant drawbacks of the Monomail was that it was ahead of its time. The design was too progressive for the engines and propellers that were around
The plane needed a low-pitch propeller for departing and a high-pitch propeller to cruise while in the air. However, by the time variable-pitch propellers arose, new multiengine aircraft entered the market. Subsequently, the 200 Monomail was retired in 1933


P-26 "PeaShooter"
 Nonetheless, it was the Monomail that set the standard for these modern planes. The designs of the B-9 and the P-26 Peashooter, both drew inspiration from the Monomail. 
Additionally, the Model 247 is perhaps the most crucial offspring from the Monomail. The airliner was operated by both commercial airlines and the military. Key holders included Avianca, Lufthansa, Canadian Pacific Airways, the United States Army Air Corps, the Royal Air Force, and the Royal Canadian Air Force. Therefore, the aircraft indeed catalyzed Boeing’s international presence.
Boeing 247
                                      A United Boeing 247 aircraft.
Altogether, the Monomail lived a short but impactful life. Its emergence in the 1930s helped shape the aviation industry for one of its most important periods heading into World War II. US aviation was able to build on the revolutions that the aircraft offered to take operations to greater heights throughout the century.  What caused the retirement of the Boeing Monomail was the airlines getting the contract to deliver the mail and it created a scandal in the process.
        Charges of corruption in the air mail system led President Roosevelt to cancel all air mail contracts. The Army resumed carrying the mail.
Federal reforms enacted in 1930 gave most routes and air mail contracts to big airline holding companies. Small, independent airlines complained this was unfair, even though most had sold their own contracts and some did not even exist when the law was passed.
The independents fought to break the holding companies' power. Their efforts led to congressional hearings and unfounded charges of corruption and conspiracy to monopolize the air mail. Responding to political pressure, President Franklin Roosevelt canceled all domestic air mail contracts on February 9, 1934. The Army Air Corps was again called upon to carry the mail.
Aero Digest Roosevelt Cartoon
Aero Digest
In February 1934, the Air Corps again began carrying the mail. Flying in the worst winter in decades, in ill-equipped aircraft, Air Corps pilots suffered a series of well-publicized accidents, mostly during training. Several pilots died. Public outcry caused President Roosevelt to suspend the Air Corps' mail service until improvements could be made.
Thomas Braniff
National Air and Space Museum Archives
Thomas Braniff led the fight by independent airlines to break the power of the airline holding companies that dominated air transportation in the 1930s.
Edward Rickenbacker
National Air and Space Museum Archives
War hero and American Airways vice president Eddie Rickenbacker condemned the air mail crisis as "legalized murder" after several Air Corps pilots died while flying the mail. Charles Lindbergh, testifying before Congress, criticized President Roosevelt for hastily canceling the air mail contracts and punishing the airlines without due process.
American Airlines Baggage Label
The Air Mail Act of 1934
Four months after the air mail crisis began, Congress passed the Air Mail Act. It cut payment rates to airlines, returned most air mail routes to the major airlines, and gave some routes to smaller airlines. It divided regulation among the Post Office, Commerce Department, and Interstate Commerce Commission.
Aviation holding companies were dissolved and airlines separated from aircraft manufacturers. Previous air mail contractors had to change their names or restructure. American Airways became American Airlines. Eastern Air Transport became Eastern Air Lines.
Philp Johnson
Punished Without a Trial
The Air Mail Act of 1934 broke up the large airline holding companies and forced the firing of airline executives wrongfully accused of conspiring to monopolize the air mail. One victim was Philip G. Johnson of United Air Lines.
Like many others, Johnson had attended Walter Brown's operators conferences in 1930, in which air mail contracts and routes had been legally awarded. Ironically, United received no contracts during these so-called "Spoils Conferences."
Nevertheless, Johnson and many others were wrongfully-and unconstitutionally-barred from the airline industry without the benefit of a trial.